• <thead id="kjdaf"></thead>
    <pre id="kjdaf"><small id="kjdaf"></small></pre>
      1. <code id="kjdaf"></code>
        1. 
          
        2. <pre id="kjdaf"><small id="kjdaf"><input id="kjdaf"></input></small></pre><pre id="kjdaf"><small id="kjdaf"><input id="kjdaf"></input></small></pre>
              1. <code id="kjdaf"></code>
              2. ?

                Products

                Tel: +86-531-58595086

                Fax:+86-531-86113759

                Mail: admin@jnkason.com

                WDS-600 Digital Display Electronic Universal Testing Machine


                WDS-600 Digital Display Electronic Universal Testing Machine
                WDS-600 Digital Display Electronic Universal Testing Machine
                 
                1.Application:
                It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test.
                Suitable for metal, rubber, plastic, spring, textile and components testing.
                It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

                2.Standard:
                ASTM, ISO, DIN, GB and other international standards.

                3.Main Technical Parameters:

                Model WDS-600
                Max. Load 600 KN
                Structure Four-column Floor Model (Upper Is Compression And Lower Is Tensile)
                Control Method Single Chip Control
                Load Accuracy 1 Class
                Load Range 2%~100%F·S (12KN~600KN)
                Displacement Resolution 0.04um
                Test Speed 1~200mm/min
                Tensile Space 700mm (Can be customized)
                Compression Space 700mm (Can be customized)
                Test Width 650mm (Can be customized)
                Power Supply AC220V±10%, 50Hz (Can be customized)
                Clamping Method Hydraulic Automatic Clamping
                Weight 3050 KG
                Dimension 1360*1000*2830mm

                4.Main Unit Feature:
                4.1 Adopt floor structure,High Stiffness, lower for tensile, upper for compression, upper for tensile, lower for compression, 
                      double space. The beam is step less lifting.
                4.2 Adopting ball screw drive, realize no clearance transmission,make sure the precision control of the test force and
                      deformation speed.
                4.3 The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due
                      to the moving distance is too large.
                4.4 The table, moving beams is made of high quality precision machining steel plate, not only  reduce the vibration
                      generated by specimen fracture, but also improve the stiffness.
                4.5 Three columns of mandatory orientation, make the main unit rigidity much improved, to further ensure the repeatability
                      of measurement.
                4.6 Adopt bolt type grip installation, make the grip replace easier.
                4.7 Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over
                      speed, overload protection device.